This is an example of a component with axial leads:
Note that the leads come out just as an axle of a car.
Next is an example of a single-ended-axial component. Note the leads come out the axis of the component. It is not, even thought the error persists in catalogs, a radial component.
A true radial leaded component has leads coming out the radius of the part.
As can be seen here - this capacitor does not have leads coming out of the radius - they are tangential. The birth of the error can be seen in the next picture of a disc capacitor. The leads were attached radially - and bent so they exit tangentially.
As time passed the leads of disc capacitors were formed to be closer and closer together - until they were no longer tangential - but somewhat radial.
But as disc capacitors were replaced with parts that had a different shape - the term was totally misused.
The following is a true Radial Leaded electrolytic Capacitor
One last note - radial tires are named so because rather than diagonal nylon plies they made with polyester cords that run perpendicular from bead to bead, up over the face of the tire and down each sidewall. The cords in the sidewalls are radial to the bead - not diagonal - thus the name.
|Top Page||wiki Index|
This information may have errors; It is not permissible to be read by anyone who has ever met a lawyer.
Use is confined to Engineers with more than 370 course hours of electronic engineering for theoretical studies.
ph +1(785) 841-3089
(C) Copyright 1994-2017, Transtronics, Inc. All rights reserved
Transtronics® is a registered trademark of Transtronics, Inc.
All trademarks are the property of their respective owners.