The
TCU111 is an RS485 Multi-drop adapter for the T1-Series of controllers.
Like the
T1 it can be Din-rail mounted. The TCU111 allows up to 32 T1s to be
connected to
the host, T2E controller, operator interface, or any higher level
computer which
can implement the T-Series ASCII computer link protocol. Each T1 is
assigned a
unique station address. By using that Station address the host can:
| TCU111 RS485 Computer link Specifications | |
|---|---|
|
Main Function |
Remote SCADA/MMI/OIU via Interface to T1s |
|
Number of stations |
32 |
|
Data Transmission Speed |
9600 BPS |
|
Max Transmission Distance |
1 Km |
|
Cable type required |
2 twisted pair - shielded |
|
Data Format |
1 start bit, 8 bit odd parity 1 stop bit |
|
Transmission Code |
ASCII |
|
Message Length |
255 Bytes Max |
|
Error Check |
Parity, Sum Check |
For more detail of the computer protocol see the Computer Link Function Operation Manual
|
|
3209
W.9th street Lawrence, KS 66049 USA |
Ph |
+1(785) 841 3089 +1(785) 841 0434 inform@xtronics.com http://xtronics.com |
Bookmark this page |
| Transtronics Home Page See our line of industrial control electronics |
PLC's Index | PC test equipment and EPROM programmer | Process Control Panel meters |
Batter Voltage UPS system | Resource library handbooks, primers and spec sheets |
Corporate
information
and
privacy statement
(C) Copyright 1994-2007,
Transtronics, Inc. All rights reserved
Transtronics® is a registered trademark of Transtronics, Inc.
Toshiba is a registered trademark of Toshiba international.