The PD686 is the lowest priced Loop-powered Meter with a 1 inch high display listed in the 1995 FM Approval Guide that has been approved by both FM and CSA as intrinsically safe and nonincendive. ('Click' here for information on hazardous area approvals) It has been approved for mounting in all hazardous locations and can be connected to a wide variety of other FM and CSA approved devices. Calibration is a quick two-step process involving the adjustment of only two non-interacting potentiometers.
PD6844 INSTRUCTIONS: 1. Insert the meter through the mounting plate. 2. Mount assembly on panel. 3. Secure with 4 brackets and 4 screws at
corners of the meter.
Use washers as needed to allow for panel
thickness. NOTES:
1. Mounting brackets require 0.8. (20 mm) clearance on either top or
side of meter for installation.
2. Panel mounting kits are not intended to provide waterproof
protection to the panel.
PARTS SUPPLIED:
1. One mounting plate (ABS plastic)
2. Four self tapping screws
3. Four mounting brackets
4. Twelve washers
Cut out required 5.45. x 3.05. (138 x 78 mm)
Overall dimensions 6.43. x 4.05. x .125. (163 x 103 x 3 mm)
| Order number | Description |
|---|---|
| PD686 | Loop-powered meter in NEMA 4X enclosure |
| PDA6844 | Panel Mounting kit |
| PDA6845 | 2" Pipe Mounting Kit |
Prices subject to change.
| 3209
W.9th street Lawrence, KS 66049 USA |
Ph |
(785) 841 3089 (785) 841 0434 inform@xtronics.com http://xtronics.com |
| Transtronics
Home Page See our line of industrial control electronics | PLC's Index | PC test equipment and EPROM programmer | Process
Control Panel meters | Current sensors | Resource library handbooks, primers and spec sheets |
Corporate information and
privacy statement
(C) Copyright 1994-2006, Transtronics, Inc. All rights
reserved
Transtronics® is a registered trademark of Transtronics, Inc.